NANOVIP Two (Without Calipers) – IC-4NAN2N

Features:

– Light, handy, multi-lingual, with top class performance and features.
– Graphic LCD that allows a wide display flexibility (multi-language menu, waveforms, histograms, page customizations, drawings, diagrams, images, etc.).- NonoStudio PC software dedicated through which it is possible to perform advanced analysis of the data stored on the uSD.- 1 voltage measurement channel (1 phase + neutral) up to 600V CAT III, with the possibility of also measuring the DC voltage, with an accuracy of +/- 0.25% + err.FS.- 1 current input with the possibility of also measuring the direct current, with an accuracy of +/- 0.25% + err.FS.- Automatic verification of the correct connection of the device to the network.- Possibility of using flexible current clamps up to 3000A or other scanners with full scale settable by the user.- High capacity batteries that allow a field autonomy of more than 24 hours even in the absence of mains power; no campaign limit if connected to the network.- Powerful calculation engine that allows in addition to the measurement of all the standard electrical quantities (VIPQAF PF THD% etc.) in true effective value (TRMS): harmonics up to 50, dips, swells, microinterruptions and many others.- 20 alarms (generic, swells, dips and interruptions).- Energy measurement in 4 time bands (rates) settable. General specifications: – Safety: 600V CAT III- Degree of protection: IP30- Guy: White backlit LCD dot matrix- Languages: English – Spanish – Italian – German – French- Communications: USP to PC- Internal memory: 64 kB- External memory: Micro SD (2GB included)- Operating temperature: from -10 to +55 C- Relative humidity: Max 95%- External power supply included: External wall-plug switching, input 100-240VAC ? 10% 47-63Hz, with interchangeable plug; output 7.5VDC – 12W- Battery pack supplied: 4 x AA MiMh 2100mAh- Battery charge autonomy: > 24h- Weight: 580g- Dimensions: 203 x 116 x 53 mm Functionality: – Traditional energy analysis: V, I, P, Q, S, F, PF, THD (V)%, THD (I)%, cosj, j, peaks, minima, maxima, averages, max. demand, etc.- Counters: kWh, kVArh, kVAh both absorbed and generated- Waveforms: V and I- Harmonics: Values and spectrum up to 50th- Sags: Dips, swells and network interruptions- Fast transients: Overcurrents and overvoltages- K factor: Up to the 25th order- Alarms: On video- Alarm log: 5 on the screen- Tariff bands: 4- Measurement campaigns: Unlimited, up to memory card filling Measurements: – Refresh rate of video data: 1 sec.- Type of possible connections: Three-phase (3 or 4-wire) two-phase (2-wire) and single-phase network- Type of network that can be connected: Low and Medium Voltage (BT and MT)- Voltage (TRMS): 1 4MOhm channel, 2 scales- Current (TRMS): 1 channel 10kOhm- Powers: Active, reactive and apparent. Single and total phase- Enegery meters: kWh, kvarh, kVAh- Harmonic analysis: Up to 50th order- Analysis of parameters EN50160: Interruptions, voltage holes and overvoltages from 500mS- Analysis Transients: Overvoltages, overcurrents and inrush currents Regulations: – CE conformity: 93/68 / EEC (LV electrical equipment); 89/336 / CEE and 2004/108 / CE (EMC – Electromagnetic Compatibility); 2006/95 / EC – 72/23 / EEC (LVD – Low Voltage); 2002/95 / EC (RoHS – Restrictions on the use of Hazardous Substances); 2002/96 / CE and 2003/108 / CE (WEEE / RAEE – Waste Electrical and Electronic Equipment).- Safety: EN 61010-1- Electromagnetic compatibility (EMC): EN 61326; EN 61326 / A1; EN 61326 / A2; EN 61326 / A3- Temperature: IEC 60068-2-1 (operating temperature); IEC 60068-2-2 (storage temperature)- Vibrations: IEC 60068-2-6- Humidity: IEC 60068-2-30 (humidity)- Overload: IEC 60947-1

Multimedia: