NANOVIP Cube (With 3x 1000A Clamps) – IC-4NAN3D

Features:

– Usable on systems: single-phase, two-phase, three-phase balanced with or without neutral, three-phase unbalanced with or without neutral.
– Complete traditional energy analysis (V, I, P, Q, S, F, PF, THD%, instantaneous / minimum / maximum / average values, meters of energy absorbed and generated both three-phase and for each single phase).- Analysis of energy quality parameters.- Current and voltage harmonics for each phase and for the neutral up to 50 degrees.- Unbalance of voltage phases.- Power outages, surges, voltage dips.- Test of compliance with the EN 50160 standard.- Real measurement of neutral current.- Display of current and voltage waveforms.- Setting of 4 tariff bands with display of the relative costs.- Configuration and display of 20 alarms on sizes and thresholds that can be set.- Time trend display of selectable quantities (trend).- Automatic check of the correct connection of the instrument to the system.- Implementation of long-term measurement campaigns (over 24 in autonomy, unlimited if connected to the network).- Multilingual.- Customizable display, choosing which sizes are displayed in rotation in the lower part and rotating by 90 degrees depending on the reading comfort. General specifications: – Safety: 600V CAT III- Degree of protection: IP30- Guy: White backlit LCD dot matrix- Languages: English – Spanish – Italian – German – French- Communications: USP to PC- Internal memory: 64 kB- External memory: Micro SD (2GB included)- Operating temperature: from -10 to +55 C- Relative humidity: Max 95%- External power supply included: External wall-plug switching, input 100 -240VAC ? 10% 47-63Hz, with interchangeable plug; output 7.5VDC – 12W- Battery pack supplied: 4 x AA MiMh 2100mAh- Battery charge autonomy: > 24h- Weight: 580g- Dimensions: 203 x 116 x 53 mm Functionality: – Traditional energy analysis: V, I, P, Q, S, F, PF, THD (V)%, THD (I)%, cosj, j, peaks, minima, maxima, averages, max. demand, etc.- Counters: kWh, kVArh, kVAh both absorbed and generated- Waveforms: V and I- Harmonics: Values and spectrum up to 50th- Sags: Dips, swells and network interruptions- Fast transients: Overcurrents and overvoltages- K factor: Up to the 25th order- Alarms: On video- Alarm log: 5 on the screen- Tariff bands: 4 Measurements: – Refresh rate of video data: 1 sec.- Type of possible connections: Three-phase (3 or 4-wire) two-phase (2- wire) and single-phase network- Type of network that can be connected: Low and Medium Voltage (BT and MT)- Voltage (TRMS): 4 input channels (3 + neutral in common + 1 auxiliary) – Current (TRMS): 5 independent entrances- Powers: Active, reactive and apparent. Single and total phase- Energy meters: kWh, kvarh, kVAh- Harmonic analysis: Up to 50th order- Analysis of parameters EN50160: Interruptions, voltage holes and overvoltages from 500mS- Analysis Transients: Overvoltages, overcurrents and inrush currents Regulations: – CE conformity: 93/68 / EEC (LV electrical equipment); 89/336 / CEE and 2004/108 / CE (EMC – Electromagnetic Compatibility); 2006/95 / EC – 72/23 / EEC (LVD – Low Voltage); 2002/95 / EC (RoHS – Restrictions on the use of Hazardous Substances); 2002/96 / CE and 2003/108 / CE (WEEE / RAEE – Waste Electrical and Electronic Equipment).- Safety: EN 61010-1- Electromagnetic compatibility (EMC): EN 61326; EN 61326 / A1; EN 61326 / A2; EN 61326 / A3- Temperature: IEC 60068-2-1 (operating temperature); IEC 60068-2-2 (storage temperature)- Vibrations: IEC 60068-2-6- Humidity: IEC 60068-2-30 (humidity)- Overload: IEC 60947-1

Multimedia: