Monnit ALTA Wireless Food Probe – IC-MNS2-4-W2-TS-FP

The ALTA Wireless Food Probe allows the user to throw away the clipboard for good. The wireless food probe replaces manual temperature checks and enhances quality and safety by bringing the power of remote data collection to commercial kitchens, food production, and restaurants. The Food Probe is CFR21 part 11 compliant and measures the internal temperature of cooked or refrigerated food from -50 to 260 C (-58 to 500 F). The data can then be transmitted to iMonnit software, allowing for data logging and a data trail as ingredients are processed, packaged, shipped, and prepared. The Food probe is highly portable and housed in an ergonomic and water-resistant IP67 case. The sensor includes: removable curved needle-style probe, pop-out grip, and wall mount. It provides bank-grade security and an industry-leading data transmission range of 1,200+ feet through up to 12 walls. Features: – Wireless range of 1000+ feet through 12+ walls (Actual range may vary depending on environment and antenna type) – Frequency-Hopping Spread Spectrum (FHSS) – Superior interference immunity – Superior power management for longer battery life. 1+ year typical life on 2 AAA batteries. Battery life is determined by sensor reporting frequency, battery type, and other variables. – Encrypt-RF Security – Datalogs 2000 or more readings if gateway connection is lost (non-volatile flash, persists through a power cycle): 10 minute heartbeats = around 22 days; 2 hour heartbeats = around 266 days – Over-the-air updates (future proof) – Free iMonnit basic online wireless sensor monitoring and notification system to configure sensors, view data and set alerts via SMS text and email

Specifications

Probe: – Temperature Range: -50.0 to 260.0 C (-58.0 to 500.0 F). Temperature rating for the SS316 tip, handle, and wire. Plug molding maximum temperature rating +107 C (+225 F). – Accuracy: +/- 0.5 C (+/- 0.90 F) – Calibrated Accuracy: +/- 0.3 C (+/- 0.54 F) – Resolution: 0.1 C (0.1 F) – Response Time (90% of Actual): Still Air: 30 Seconds, Water: 2 Seconds. Response Time depends on how long it takes the medium to bring the probe body up to actual temperature – Temperature Element: RTD PT1000 1 kOhm at 0 C, Alpha Class ‘B’ – Probe Tip Material: Stainless Steel (SS316) – Probe Connector: 3.5 mm Mono Plug – Weight: 0.64 oz (18 g) – Length: 54.25 inches – Width: 0.25 inches Meter: – Battery Type: 2 Replaceable AAA 1.5 V Batteries – Supply Voltage: 2.0 to 3.8 VDC – Current Consumption: 0.2 uA (sleep mode), 0.7 uA (RTC sleep), 570 uA (MCU idle), 2.5 mA (MCU active), 5.5 mA (radio RX mode), 22.6 mA (radio TX mode) – Temperature Operating Range: -50.0 C to 260.0 C (-58.0 F to 500.0 F) – Weight: 4.2 oz (119 g) – Dimension: 123.6 mm (4.87 inches) x 76.6 mm (3.02 inches) – Battery Life: With typicall use, included AAA batteries will last about 1 year. – Optimal Battery Operating Temperature: +10 C to +50 C (+50 F to +122 F) – Enclosure Material: ABS – Operating Frequency: 433 MHz Operating Frequency – Certifications: CE Certified. Tested and found to comply with: EN 300 220-2 V3.1.1 (2017-02), EN 300 220-2 V3.1.1 (2017-02) and EN 60950. – Device Range: Device Range Up to 1,200 ft. non-line-of-sight, wireless device range – Security: Encrypt-RF (Diffie-Hellman Key Exchange + AES-128 CBC)