Mongoose M80 3 Btn Remote – Red – 433mhz

Part# MRC83R – Red LED – 433MhzCurrent – from mid 2011Battery type: CR2032 x 1Not interchangable with each other. The above frequencies are allocated by NZ Radio Service for ‘short duration transmission’ vehicle security use. Compliance N4096 Z333Replacement plastic case: Part# 242183A new remote has to be memorised into your security system for it to operate – this is called ‘code learning’. The coding instructions can be found in your owners manual (which you can download from our website if yours is misplaced) or is detailed below.To learn new remotes to M80 models:Disarm by existing remote, or use the override- Open the drivers door and leave open- Turn the ignition ON/OFF 3 times – siren chirps- Press arm button on first remote (siren chirps)- Press arm button on second remote (siren chirps)- Repeat for any other remotesWait 10 seconds for learning process to completeTo learn new remotes to M80II & M80GII models:1: Disarm open drivers door (Keep door open while programming) – LED starts fast flashing2: Within 10sec turn IGN on – the LED will now light solid for 10 seconds3: Within 10sec, turn IGN OFF then back ON4: The LED stays on & the siren chirps 3 times to confirm remote code learning mode5: Press button one on the new remote – siren chirps once to confirm6: Press button one on a 2nd remote you wish learnt siren chirps twice to confirm7: To finish, turn the ignition off or wait 10 seconds to end of programming – siren chirps quickly 3timesNOTE: When learning a new replacement or additional remote, the original remote(s) mustbe re-learnt or they will be erased from memory and will not operate this system.